IPSES S.r.l.





Silver Alliance Partner

IPSES works in the field of advanced technologies for testing, RF systems, industrial automation, control and measure applications. It designs and develops innovative hardware, firmware and software in close contact with client, determining needs and requirements, for truly effective and targeted solutions, ensuring high quality, design flexibility, customizable cost and development time, long-term support and maintenance. IPSES has a Wide knowledge of all National Instruments platforms and wide experience in using and integrating NI hardware (CompactRIO, PXI, CAN, DAQ, etc.) and software (LabWindows/CVI, LabView and TestStand). Furthermore, IPSES provided itself with a quality management system based on a strong customer focus, the motivation and implication of top management, the process approach and continual improvement.



Services Offered: Contract Product Development, Fabrication, Assembly, & Installation, System Integration

Contact IPSES S.r.l.


Company Info



Established 2003


Years as Alliance

11 to 25 Employees




Top Industries


Communications Equipment




Top Application Areas

Embedded Systems


Test and Measurement



NI Hardware

CompactRIO/R Series


PXI Streaming & Synchronization

RF & Wireless

Vision Systems


NI Software



LabVIEW Real-Time







Address: Via Suor Lazzarotto, 10 , Cesate, Italy
Phone: 02 39449519




NI Certifications













Company Certifications

ISO 9001



Professional Engineer

Project Management Professional - PMI


Products, Solutions, and Case Studies



Simulation system of GPS constellation for synchronization and timing applications based on PXI and LabVIEW

Stand-alone system, based on PXI platform, with the possibility to easily use external clock, able to manage and configure any GPS constellation, to generate the corresponding suitably modulated signal in the L1 band (1575.42 MHz) and allow the run-timemodification of the main parameters of each received GPS satellite such as power or even just its presence. (In Italian)


System for the simulation and generation of naval radar and meteorological signals based on PXI and LabVIEW for the validation and characterization of wireless BRAN devices

Stand-alone system, based on the PXI platform, equipped with an I/Q modulator and an upconverter able to directly generate all the different types of radar signals provided by law through an intuitive user interface managed by a PC. (In Italian)


System for the monitoring and characterization of devices for time generation and frequency based on LabVIEW and sbRIO

Embedded stand-alone system for the monitoring and characterization of reference systems of time and frequency with an accuracy of less than 10 ns, able to operate autonomously for at least three months, keeping track of all the measurements carried out and allowing the complete monitoring and remote control. (in Italian)


Platform for functional and vision test of Smart Energy Meter boards for single-phase network energy meters

Modular and scalable test platform based on NI PXI that integrates measurement instruments, pneumatics and cameras for vision tests. The sequence, developed with NI TestStand and NI LabVIEW, manages all equipments and allows parallel testing of four DUT.




Software Products

ViTest for NI TestStand

ViTest by IPSES is a powerful software library especially designed for fast implementation of vision tests using TestStand. The library can be installed as TestStand step types, making immediately available advanced analysis and image processing features, facilitating vision tests in automatic testing.



Case Studies

Development of a satellite delay emulation system through boards equipped with user-programmable FPGA

Project based on NI LabVIEW and PXIe-5641R board, equipped with two IF outputs and two inputs (all with real-time bandwidth of 20MHz and maximum frequency of 80MHz), a 128MB RAM and a NIFPGA board Xilinx Virtex-5 SX95T fully programmable and with direct connection to the output DAC and the ADC input.


Analizzatore di pacchetti per test di regressione su protocollo eBUS tramite integrazione del linguaggio di scripting LUA

Tool realizzato tramite NI LabVIEW in grado di analizzare i dati dei file di log e identificare le violazioni delle regole previste dall’eBUS sfruttando un set di script per linguaggio LUA. Tale tecnologia di scripting è stata integrata nel tool per rendere il set di regole customizzabile da parte dell’utente finale senza ricompilazione del tool di analisi.


Unified system for characterization of bitumens and asphalts based on NI Compact RIO and NI LabVIEW

system for the physical and mechanical characterization of bitumens and asphalts by tests of resistance and durability (In Italian)


System for the characterization of earth samples by cyclical and dynamical tests

System with three closed loops (PID) based on real-time architecture that controls loads and pressures in a short and reliable times, so to manage the high forces which are involved in the test. (In Italian)



Contact IPSES S.r.l.


*Information supplied on this page is provided by the partner and has not been verified by NI


  Back to Top