EURINS SRL

 

 

 

 

Silver Alliance Partner

EURINS combines solid experiences of: engine test bench (diesel, gasoline, natural gas, alternative fuel, hybrid), roller test bench (motor bykes, cars, trucks), measurements and tests in the industrial and "on the field", systems for both production line and laboratory, solutions distributed even in remote sites, systems for climatic wind tunnel, systems for acoustic and vibrational analysis, telemetering and remote-control solutions via radio, GSM, SAT, acquisition from both sensors and field buses, design and development of "custom" boat systems, GPS / DGPS positioning both local and remote, both land and marine applications

 

 

Services Offered: System Integration


Contact EURINS SRL

 

Company Info

 

Established 1999

15

Years as Alliance
Partner

 

 


 

Top Industries

Automotive

 

Top Application Areas

Data Acquisition, Generation

Digital Buses, Protocols

Embedded Systems

 

NI Hardware

 

NI Software

 

 

Locations

Headquarters

Address: Via Prati, 1/1 - Ponte Ronca , Zola Predosa, Bologna Italy
Phone: 051 0951916

 

Certifications

 

NI Certifications

#

CLD

1

 

Company Certifications

None Listed

 

Individual

None Listed

 

Products, Solutions, and Case Studies

 

 

AdaMo

"AdaMo" system, based on scalable Real-Time/FPGA NI CompactRIO platform, allows to meet specific requirements of each renewal, considering previous settings, performances and integrating necessary evolutions.

 

 

Products

Software Products

AdaMo

AdaMo mesures and controls input and output channels up to 1000 Hertz rate (AdaMo RT), realizing "dynamic" cycles (WHTC) completely respecting the reference legislation.

 

EOLO cRP

EOLO cRP is an embedded data logger for data acquisition from sensors, communication with ECU (Electronic Control Units), data transmission in telemetry, GPS positioning.

 

 

Case Studies

"AdaMo" gives new life to the test bench: renew without waste, passing from obsolete to best-in-class

"AdaMo" system, based on scalable Real-Time/FPGA NI CompactRIO platform, allows to meet specific requirements of each renewal, considering previous settings, performances and integrating necessary evolutions.

 

Road simulator on rotating rollers for real fatigue testing of mechanical components in buses, trucks and trailers

Develop an architecture based on an NI PXI Real-Time node, three NI CompactRIO nodes and a computer with OS Windows, minimizing cabling and locating intelligence.

 

Measurement and analysis of electric power on board hybrid and electric vehicles at the Joint Research Center (Ispra - Italy)

Setting up NI CompactRIO-9068 with specific hardware modules, develops and integrates software components (Windows, Real-Time and FPGA) for synchronous acquisition from various data sources.

 

CAN bus parameter converter of vehicles with analogue signals for tests on roller benches

NI Single-Board RIO embedded system creates an autonomous device, able to identify the type of CAN traffic, intercept/decode chosen parameters, generate corresponding analog signals.

 

 

Contact EURINS SRL

 

*Information supplied on this page is provided by the partner and has not been verified by NI

 

  Back to Top