G Systems Dynamic Signal Buffered Splitter

Solution by: G Systems, L.P.


The Dynamic Signal Buffered Splitter protects sound and vibration sensor acquisitions from unwanted effects of parallel troubleshooting or diagnostic instruments.
˂
˃

Learn More

G Systems Dynamic Signal Buffered Splitter provides buffered and unbuffered outputs connected to the same signal input. Up to 16 sensors, typically accelerometers, proximity probes, microphones, and pressure transducers, may be connected to the 16 signal inputs. The 16 un-buffered (pass-through) outputs and 16 buffered outputs may be connected to acquisition hardware like the NI Dynamic Signal Acquisition Module. This device enables test engineers to connect external measurement instruments to the system for additional measurement functionality or diagnostics without affecting the process measurements on the primary system.

Features
  • box dimensions are 19” wide x 7.25” deep x 3.47” high
  • Power comes thru an IEC320-C14 standard inlet with a range of 88-264VAC and 47-63Hz
  • two sensor input ranges: +/-15 VDC or +/-30 VDC
  • 3dB bandwidth is DC-200KHz
Benefits
NI System Content